AirPal® STAND: Added convenience for AirPal lateral transfer systems
Part Numbers: 700-1, 700-2
|Modular Design: The AirPal STAND is an unique modular storage and mobility system. Since the design is modular you can customize it to exactly fit your needs. The I.V pole design means components can be added or removed from the pole via set screws with nothing more than a standard hex wrench. The AirPal STAND is offered in two pre-configured versions; with either single or dual Air Supply capacity. (Air Supply is not included – see AirPal Air Supply under the "Products" Menu for more information).
||Highly Mobile: The I.V pole design provides additional benefits such as the circular caster layout allowing the AirPal STAND to easily move in any direction. Another benefit of the design is that it is highly resistant to tip over, this means it is highly unlikely that components carried in the AirPal STAND such as the Air Supply will become damaged due to accident.
Easy to Maintain: Another important feature of the design is the ease of maintenance and cleaning. To start with, all of the casters are fendered so fluids and soils remain on the floor and are not kicked up on to the AirPal STAND. The I.V. Pole design also minimizes the amount of surface area that has to be cleaned and coupled with the absence of ridges and inside corners; the AirPal STAND can be wiped down in a minimal amount of time. The storage basket is easily removed and can be cleaned in a large sink, wiped down by hand, and is dishwasher safe. Since the AirPal STAND can be thoroughly cleaned and disinfected in a minimal amount of time, the risk of cross contamination is reduced.
OR ---SEE the AIRPAL CART under the Products/Accessories Menu for another system mobility convenience option.
Keep your lateral transfer system together & available at your fingertips.
AirPal Stand Specifications:
Storage Basket Opening: 12.25" X 7.5" Depth: 10"
Pole: Stainless Steel
The base unit of the AirPal STAND can be modified at any time your needs or requirements change. The modular accessories mount to the AirPal STAND by sliding into place on the pole. They are held in place with a recessed set screw, and are easily adjusted via a standard hex wrench so no special tools are required.
Single Canister Ring: Replace the double with this single canister ring and free up an Air Supply when not working with Special Populations , i.e. Bariatrics
Double Canister Ring: Replace the single with this double canister ring so an additional Air Supply can help reduce friction forces when working with Special Populations.
Large Equipment Basket with Bracket: Add an additional Storage Basket to enable carrying multiple widths of AirPal Platforms or use it as a storage spot for a hose extension (the Hose Extension is required for use in MRI environments.)
Cord-Winder Hooks: When changing to a dual canister ring you may want to add another set of Cord-Winder Hooks. The hooks enable you to wind the Air Supply's power cord neatly on the AirPal STAND. There is also a snap secured loop to hold the power cord on the Air Supply itself.